PH7 LIMITED

Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment

Single point power connection and high-visibility control panel with power, heat-trace, and hi/lo temperature indicator lights maximize convenience. For use in Class I Division 2 hazardous environments.

Add to Enquiry Basket

Share this product!

Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment

Single point power connection and high-visibility control panel with power, heat-trace, and hi/lo temperature indicator lights maximize convenience. For use in Class I Division 2 hazardous environments.

Add to Enquiry Basket

Share this product!

Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment

Single point power connection and high-visibility control panel with power, heat-trace, and hi/lo temperature indicator lights maximize convenience. For use in Class I Division 2 hazardous environments.

Add to Enquiry Basket

Share this product!

Description

  • Electric heat-traced stations prevent freezing even in extreme conditions
  • IEEE compliant heat-traced station includes control panel with single point connection for electrical components.
  • Single point connection for electrical components. Includes power indicator light, heat trace indicator light and high/low temperature warning lights. Panel includes dry contacts to signal power failure or high/low temperature warning. Panel also includes dry contacts to signal an event when alarm options are installed. UL listed NEMA 4X approved for Class I, Division 2, Groups B, C, and D.
  • Units are intended for cold weather environments down to -40°C
  • UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless-steel screws for easy maintenance.
  • 254mm diameter orange ABS plastic with 75.7LPM flow control.
  • 1″ IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 737mm stainless steel pull rod.
  • 1-1/4″ NPT female top inlet.
  • Comes wired ready to connect to 240V power supply.
  • Comes with ANSI compliant signage
  • We recommend that this unit be installed with a series tempering valve to meet the ANSI requirement of “tepid” water supply.
  • Factory tested prior to shipment. Ships fully assembled and crated.
  • Audio visual alarm options available
  • Stocked Item: No – these are made to order, allow 6-8 weeks for manufacture and shipping.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate
NEMA Enclosure Types and Hazardous Location

Videos

Description

  • Electric heat-traced stations prevent freezing even in extreme conditions
  • IEEE compliant heat-traced station includes control panel with single point connection for electrical components.
  • Single point connection for electrical components. Includes power indicator light, heat trace indicator light and high/low temperature warning lights. Panel includes dry contacts to signal power failure or high/low temperature warning. Panel also includes dry contacts to signal an event when alarm options are installed. UL listed NEMA 4X approved for Class I, Division 2, Groups B, C, and D.
  • Units are intended for cold weather environments down to -40°C
  • UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless-steel screws for easy maintenance.
  • 254mm diameter orange ABS plastic with 75.7LPM flow control.
  • 1″ IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 737mm stainless steel pull rod.
  • 1-1/4″ NPT female top inlet.
  • Comes wired ready to connect to 240V power supply.
  • Comes with ANSI compliant signage
  • We recommend that this unit be installed with a series tempering valve to meet the ANSI requirement of “tepid” water supply.
  • Factory tested prior to shipment. Ships fully assembled and crated.
  • Audio visual alarm options available
  • Stocked Item: No – these are made to order, allow 6-8 weeks for manufacture and shipping.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate
NEMA Enclosure Types and Hazardous Location

Videos

PRODUCTS YOU MAY ALSO LIKE: