fbpx

Drive Over Bunding Installation

pH7 offers three types of drive over bunding which can be installed in front of racking, across doorways, or anywhere that you want to create a purpose built bunded area to contain liquids.

Installation of each type of bunding is slightly different and while you can do this yourself, we’re always happy to quote to do the job for you.  Our installer is very familiar with each type of bunding and can take the hassle off your hands.

Installation services are currently only available from Hamilton north.

SpillTech Economy – EVA Foam Bunding:
  • Best installed on clean flat concrete or other solid surfaces.
  • Area needs to be free of dust, dirt and grease.
  • Bund planks and corners are cut to size.
  • ADOS F22 contact adhesive is used to stick down the bunding.
SpillTech UltraBund – Urethane Bunding:
  • Suitable for use with corrosives and toxic and ecotoxic substances.
  • Area needs to be free of dust, dirt and grease.
  • Planks can be cut to size.
  • Bunding is glues and bolted to the ground.
  • 5mm expansion gaps between planks allow for expansion in environments with significant temperature change.
SpillTech Aluminium Bunding:
  • Ideal for high traffic areas and the storage of flammable liquids.
  • Area needs to be free of dust, dirt and grease.
  • Planks can be cut to size and corners mitred.
  • Bunds are glued and bolted to the ground.

Call now for a quote on 0800 323 223 or send us an enquiry by clicking on the enquiry button below.