PH7 LIMITED

Eyewash, Deck Mounted, AutoFlow – 90° Swing-Down

AutoFlow™ eyewash for mounting on counter.

Add to Enquiry Basket

Share this product!

Eyewash, Deck Mounted, AutoFlow – 90° Swing-Down

AutoFlow™ eyewash for mounting on counter.

Add to Enquiry Basket

Share this product!

Eyewash, Deck Mounted, AutoFlow – 90° Swing-Down

AutoFlow™ eyewash for mounting on counter.

Add to Enquiry Basket

Share this product!

Description

  • ApplicationAutoFlow™ eyewash for mounting on the counter. Spray heads swing down from storage to the operational position, activating water flow. Available in a variety of spray head configurations to minimize obstructions at a sink. Note: If the unit is not installed at a sink, floor drain should be provided underneath the unit to prevent the accumulation of water on the floor.
  • Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2″ IPS plug-type valve with PTFE coated O-ring seals. Swinging head assembly down from storage to operational position opens orifice and activates water flow. The unit remains in operation until spray head assembly is returned to a storage position.
  • Strainer: Unit is furnished with an in-line strainer to protect valve and spray heads from debris in the waterline.
  • MountingValve is installed in a chrome-plated brass housing. Unit mounts on the countertop behind the sink. Furnished with mounting hardware for securing unit to counter.
  • ConstructionPolished chrome-plated brass.
  • Supply1/2″ NPT female inlet.
  • Sign: ANSI-compliant identification sign.
  • Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate

Videos

Description

  • ApplicationAutoFlow™ eyewash for mounting on the counter. Spray heads swing down from storage to the operational position, activating water flow. Available in a variety of spray head configurations to minimize obstructions at a sink. Note: If the unit is not installed at a sink, floor drain should be provided underneath the unit to prevent the accumulation of water on the floor.
  • Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2″ IPS plug-type valve with PTFE coated O-ring seals. Swinging head assembly down from storage to operational position opens orifice and activates water flow. The unit remains in operation until spray head assembly is returned to a storage position.
  • Strainer: Unit is furnished with an in-line strainer to protect valve and spray heads from debris in the waterline.
  • MountingValve is installed in a chrome-plated brass housing. Unit mounts on the countertop behind the sink. Furnished with mounting hardware for securing unit to counter.
  • ConstructionPolished chrome-plated brass.
  • Supply1/2″ NPT female inlet.
  • Sign: ANSI-compliant identification sign.
  • Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate

Videos

PRODUCTS YOU MAY ALSO LIKE: