PH7 LIMITED

Eye/Face Wash Wall Mounted – No Bowl

Eye/face wash for wall mounting without bowl.

Add to Enquiry Basket

Share this product!

Eye/Face Wash Wall Mounted – No Bowl

Eye/face wash for wall mounting without bowl.

Add to Enquiry Basket

Share this product!

Eye/Face Wash Wall Mounted – No Bowl

Eye/face wash for wall mounting without bowl.

Add to Enquiry Basket

Share this product!

Description

  • Application: Eye/face wash for wall mounting. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face. Unit is provided without a bowl or drains for wastewater. Note: Floor drain should be provided underneath the unit to prevent the accumulation of water on the floor.
  • Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2” IPS chrome plated brass stay-open ball valve. The valve is US-made with chrome-plated brass ball and PTFE seals.
  • Mounting: Heavy-duty cast aluminium wall bracket with corrosion-resistant powder-coated finish.
  • Construction: Polished chrome-plated brass.
  • Supply: 1/2” NPT female inlet.
  • Sign: ANSI-compliant identification sign.
  • Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate

Videos

Description

  • Application: Eye/face wash for wall mounting. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face. Unit is provided without a bowl or drains for wastewater. Note: Floor drain should be provided underneath the unit to prevent the accumulation of water on the floor.
  • Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2” IPS chrome plated brass stay-open ball valve. The valve is US-made with chrome-plated brass ball and PTFE seals.
  • Mounting: Heavy-duty cast aluminium wall bracket with corrosion-resistant powder-coated finish.
  • Construction: Polished chrome-plated brass.
  • Supply: 1/2” NPT female inlet.
  • Sign: ANSI-compliant identification sign.
  • Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Additional information

Brand

Guardian

Minimum Order Quantity

1 each

Downloads

AS4775-2007 Compliance Checklist
Catalogue Page
Parts List
Corrosive Guide
Guardian Compliance Certificate

Videos

PRODUCTS YOU MAY ALSO LIKE: