Is your site HAZCHEM compliant? Find out in 20 minutes with our free assessment tool!

CleanAIR A3AXP3 Filter

Combination A3AXP3 gas and particulate filter. For use with CleanAIR Chemical 2F PAPR systems and GX02 full face mask.

Add to enquiry

DESCRIPTION

  • The AXA3P3 filter is a specialist filter providing protection from the following contaminants:
    • High concentrations (up to 5,000ppm) of organic gases and vapours with a boiling point below 65°C.
    • Organic gases and vapours with a boiling point below 65°C.
    • Particulates
  • Single use only: AX filters are only specified for one class and must be changed after every shift.
  • Dimensions: diameter / height: 110 mm / 158 mm
  • Weight: 635 g
  • Two filters are required for the Chemical 2F PAPR systems including:
  • A single filter is needed when used with th3 GX02 full face mask

Brand: CleanAIR

Unit Of Measure (UOM): Each

In Stock

Last Updated: 14th July 2026 at 12:16pm New Zealand Standard Time (NZST)

Disclaimer: Inventory levels shown are for informational purposes only and may not reflect current stock.
Please contact us directly to confirm exact availability.

RELATED PRODUCTS AND SYSTEMS

If you’re on this page, you’d probably like these products too.

CleanAIR VariCap

SKU: CA-720030

RS01SD – Premium Silicone Half Mask

Options Available

CleanAIR Chemical 2F Kit with Decon Belt

SKU: CA-51FDAAUS

STS Full Face Mask (CF01) – High Risk Spray Respiratory Starter Kit

SKU: STSFFHR0