SpillFix General Purpose Spill Kit – 100L

SKU: SKSF100

Unit Of Measure (UOM): Each

General purpose spill kit for use with any liquid spill. Absorbs up to 100L of oil and chemical spills.

Description

General purpose spill kit is suitable for hazardous spills including: oils, fuels, lubricants, paints and most chemicals and mild corrosives.
The spill kit contains a mixture of loose absorbent fibre, absorbent socks and pads as well as the necessary PPE including gloves and a respirator plus instruction card and disposal bags.
The SpillFix absorbent is made from 100% renewable Coir peat.
The wheelie bin is easily identified as a spill kit and should be placed in a prominent position near where liquids are stored or used. A content list with reorder codes can be found in the lid of the wheelie bin.
Absorbs up to 100L.
Note: General purpose kits are not suitable for some strong acids including Nitric and Hydrofluoric Acid.
Spill Kit Refill Code: SKSF100-R – includes contents only.

Additional Information

Brand: SpillFix, SpillTech

Unit Of Measure (UOM): Each

Resources

	Spills and Emergency Management Brochure
	SDS Sheet
	SpillFix SDS Sheet
	SpillFix SDS 2022
	SpillFix Chemical Absorption Sheet
	SpillFix User Guide
	Spill Response Procedures

ITEM	QTY
SpillTech® Chemical Pads 400gsm	20
SpillFix® Absorbent Bag – 50L	1
SpillFix® Absorbent Bag – 15L	4
SpillFix® Absorbent Sock – 1.5m	1
SpillFix® Absorbent Sock – 3m	1
P2/N95 Disposable Mask	1
Pair Chemical Gloves – XL	1
Dust Pan and Brush Set	1
SpillTech® Waste Disposal Bags	2
Cable Ties	2
Breakaway Red Cable Tie	1
SpillFix® Instruction Card	1