CleanAIR AerGO A1 P R SL Filters (Pair)

CleanAIR AerGo A1 P R SL (A1P3 combination) filters protect against organic vapours and gasses and particles in the form of solid and liquid aerosols.

Add to enquiry

  • A1 P R SL filters (Pair) for use with the CleanAIR AerGo PAPR system (A1P3 combination filter)
  • Provides P3 protection against particles in solid and liquid aerosol form and protection against organic gases and vapours with a boiling point above 65°C. The main group of these substances are hydrocarbons (e.g.: toluene, benzene, xylene, styrene, cyclohexane, trichloroethylene, tetrachloromethane) and organic solvents and thinners (petrol, kerosene, diesel, mineral turpentine, ethylene glycol, methyl isobutyl ketone, isobutanol, etc.).
  • Always change both filters at the same time.
  • These filters can be paired with the following accessories for enhanced benefits:
    • The CleanAIR AerGO Spark arrester (CA-300020) and Prefilter (CA-300015) increases the lifetime of the CleanAIR AerGO filters and it is highly recommended to be used at all times.
  • Filters are removed from the unit by unscrewing them one by one separately in a counter clockwise direction.
  • New filters must be attached to the unit one by one, by screwing the filters into the units body in a clockwise direction. Ensure they are properly tightened, which guarantees leak tightness.
  • Additional Accessories:
    • CleanAIR AerGO Prefilters 10 pcs CA-300015
    • CleanAIR AerGO Spark Arrestors 10 pcs CA-300020
    • CleanAIR AerGO Filter Cover, Spark Arrestors, Prefilters (2+2+2 pcs) CA-300030

Brand: CleanAIR

Unit Of Measure (UOM): Pair

Don't leave empty handed!

7 Step 'Spill Response Procedure' Guide

Enter your email below to get a FREE guide on spill response!