Is your site HAZCHEM compliant? Find out in 20 minutes with our free assessment tool!
Is your site HAZCHEM compliant? Find out in 20 minutes with our free assessment tool!
NatureSorb is a natural dehydrated sphagnum peat moss absorbent for hydrocarbon and chemical spill cleanup. Fast-acting, biodegradable, and non-toxic. Will absorb up to 120L of oil and chemical spills.
NatureSorb is a premium dehydrated sphagnum peat moss absorbent engineered for rapid hydrocarbon and chemical spill response across industrial, commercial, and environmental settings. NatureSorb delivers fast, effective absorption with the added benefit of being a naturally derived, biodegradable product.
Unlike synthetic granular absorbents, NatureSorb is oleophilic and hydrophobic – meaning it actively seeks out and locks in oils and hydrocarbons while resisting water. It can absorb approximately 3.8 litres of motor oil per 450 grams used, will not leach absorbed oil or petrochemicals back into the environment, and can reduce flammable vapours on hydrocarbon-contaminated sites by up to 90%.
For health and safety managers in manufacturing, logistics, transport, agriculture, and environmental services, NatureSorb offers a compliant, practical, and environmentally responsible solution for your spill response programme.
Brand: Naturesorb
Country of Origin: Canada
Unit Of Measure (UOM): Each
Minimum Order Quantity (MOQ): 1 bag
Quantity per Pallet: 30 bags
In Stock
Last Updated: 22nd September 2026 at 9:59pm New Zealand Standard Time (NZST)
Disclaimer: Inventory levels shown are for informational purposes only
and may not reflect current stock.
Please contact us directly to confirm exact availability.
NatureSorb is a versatile spill absorbent trusted across a wide range of industries and settings:
NatureSorb is effective against a wide range of hydrocarbons and chemicals including petrol, diesel, engine oil, gas-oil, light and heavy crude oils, PCBs, oil-based paints, inks, dyes, animal fats, vegetable oils, and blood. It is oleophilic and hydrophobic, meaning it actively attracts oil-based substances while resisting water absorption.
Yes. NatureSorb can be scattered across the surface of standing water to absorb hydrocarbon contamination. Absorption times on water are typically around 15% slower than land applications. After use, the absorbent tends to form a mat on the downwind side of the water surface where it can be recovered.
Simply pour NatureSorb to completely cover the spill area. Allow a few minutes for full absorption to occur. Then sweep, scoop, or vacuum up the used absorbent. The absorbent/spill mix should be containerised for disposal by incineration, landfill, or land farming as appropriate to your site and local regulations.
Yes, NatureSorb is non-toxic and non-abrasive. It is made from natural peat moss and contains naturally occurring microorganisms. Standard precautions apply: avoid inhalation of dust over extended periods, keep open wounds covered, and use appropriate eye protection in dusty conditions. A respirator for nuisance dust is recommended if dust levels are elevated during application.
No. NatureSorb will not leach absorbed oil or petrochemicals back into the environment once absorbed, making it a reliable choice for spill response in sensitive areas.
If you’re on this page, you’d probably like these products too.
